Customizable Ordinary version single-leaf security door

The Ordinary class 3 model security door is certified by passing the ENV 1627 test, despite being a basic security door it has all the features of a higher grade one.

It is composed of:

- Galvanized Shell: 8-tenth cold-pressed steel sheet with 1 vertical and 5 horizontal reinforcing rods.

- Subframe and Frame Galvanized 20-tenths, fixed to the wall with 8 very strong steel anti-shear clamps.

- Insulation with polyurethane foam in the sash and plastic retainers in the frame holes of the rostrums and deadbolts.

- No. 4 Increased Rosters: arranged on the side of the hinges made of steel with a diameter of 20 mm that prevent door unhinging.

- No. 2 Hinges adjustable vertically and horizontally for better installation.

- Lock: with mandrels, controlled by a European cylinder equipped with 1 construction key + 5 master keys, which allows the

locking in 8 vertical points and is protected externally by a steel defender.

- anti-drill plates: special steel plates, more resistant to drills and other burglary tools, placed above each lock and devices to provide additional protection.

- Opening Limiter: Easily operated from the inside, allows viewing outside or passage of small objects without opening the door.

- Draft shield: automatic drop-down, flush with the floor ensures tightness against air and light infiltration.

- Peephole: 180° wide-angle.

- Gasket : Perimeter, made of special material, double, on sash and frame, for optimal anti-spill seal and noise reduction.

- Accessories : 5 variants available, standard equipment in silver aluminum.

-

Data sheets and panels:

Details in Italian language

Details in English language

Details in Spanish language

Details in German language

Details in French language

-

Measurements Survey:

FILOGRASSO SRL DOES NOT TAKE RESPONSIBILITY ON WRONG MEASUREMENTS BY THE CUSTOMER, RETURN IS NOT POSSIBLE IF THE GOODS HAVE THE MEASUREMENTS IN ACCORDANCE WITH THOSE SPECIFIED BY THE CUSTOMER IN THE ORDER. IN CASE OF AN ERROR ON OUR PART WE WILL SOLVE THE PROBLEM AS QUICKLY AS POSSIBLE (RETURN NOT ACCEPTED ON CUSTOM MADE AND PERSONALIZED ITEMS)

-

Type of measurements:

NET PASSAGE LIGHT: is the clean passage measurement that the door frame will have when the door is opened.

FRAMEOUTSIDE: is the maximum outside measurement of the frame.

JAMSLIGHT: is the measurement inside the jambs made of marble or any other material.

WALL SI ZE: is the measurement of the hole in the masonry.

-

Measurements required:

Width (Net passage clearance): is the measurement between the two door frame posts.

HEIGHT (Net passage clearance): is the measurement between the top door frame pillar and the floor.

-

Measurements automatically calculated by the configurator (varies by model and door frame):

Outer frame width: is the maximum outer frame width measurement.

Outer frameheight: is the measurement from the floor to the outer part of the upper frame.

-

Advice on correct relief:

To best obtain the NET PASSAGE LIGHT measurement, we recommend surveying the STIPITE LIGHT measurement from this by deflating 2 cm in Width and 1 cm in Height and then entering it into the configurator.

Always check that the measurements OUTSIDE FRAME calculated by the configurator are larger than the measurements WALL SIZE measured by you.

-

Smart opening:

By smart opening we mean that the door can be operated with cell phone and other access control devices.

For this section we use NUKI devices.

-

SHIPPING AND TIMING:

Shipping will be within 30 working days (excluding Saturday, Sunday and holidays) from the date of receipt of payment, by courier 3/5 working days for shipments to Italy and 5/10 days for shipments to Europe.

-

WARRANTY

The shipment being insured needs acceptance subject to control at unloading by the customer.

In the absence of this observation the Filograsso srl does not assume responsibility for any damage.